reseting the axis problem

reseting the axis problem

Postby Class1987 » Sun Feb 02, 2020 12:29 pm

Hi everyone I seem to be having trouble resetting my axis to it's correct position, I've tried resetting the pivot, gizmo and even tried resetting the Xform still didn't work I have an image of my problem so if anybody can guide me on getting this fixed I'd be most grateful.
Cheers, Ian.
Attachments
axis.png
Class1987
Full Time Fireman
 
Posts: 67
Joined: Thu Jun 16, 2016 12:40 am
Has thanked: 0 time
Been thanked: 3 times

Reseting the axis problem

Postby DigitalRails » Tue Feb 04, 2020 7:13 am

https://knowledge.autodesk.com/support/ ... 3-htm.html
Maybe your axes are in local view than world?
The screenshot is also have blur texts, so I am confused.
DigitalRails
Engine Cleaner
 
Posts: 1
Images: 0
Joined: Fri Oct 25, 2019 11:02 am
Has thanked: 0 time
Been thanked: 0 time

Re: reseting the axis problem

Postby ukrichb » Tue Feb 04, 2020 11:04 pm

Hi,

How do you want to reset it? Do you want to reorientate it to a specific position?

Once you select the pivot point, you can move it around like you would any object.

Could you explain what you don’t like about where it is and what ultimately you want to do?

Richard
ukrichb
General Shed Duties
 
Posts: 13
Joined: Fri Feb 09, 2018 11:43 pm
Has thanked: 0 time
Been thanked: 1 time

Re: reseting the axis problem

Postby ukrichb » Tue Feb 04, 2020 11:05 pm

Or do you want the object to be moved up?
ukrichb
General Shed Duties
 
Posts: 13
Joined: Fri Feb 09, 2018 11:43 pm
Has thanked: 0 time
Been thanked: 1 time

Re: reseting the axis problem

Postby Class1987 » Thu Feb 06, 2020 12:42 pm

Hi Richard what I'm trying to get at is as you see on the image the axis should be positioned in line with the object created as shown on this image here with the Y facing left and the X facing up. As you see on my other photo the axis is not in line with the model. I did do a test the other day when rotating an object and the axis doesn't follow the object created it stays put. Should it follow the created object so it lines up with it?
Cheers, Ian.
Attachments
axis2.png
Class1987
Full Time Fireman
 
Posts: 67
Joined: Thu Jun 16, 2016 12:40 am
Has thanked: 0 time
Been thanked: 3 times

Re: reseting the axis problem

Postby ukrichb » Thu Feb 06, 2020 5:11 pm

Can you do me a favor....can you do a screen shot of the whole screen with all the settings?

I am willing to look at the file if you send it to me. I will PM my email address.

Richard
ukrichb
General Shed Duties
 
Posts: 13
Joined: Fri Feb 09, 2018 11:43 pm
Has thanked: 0 time
Been thanked: 1 time

Re: reseting the axis problem

Postby ukrichb » Thu Feb 06, 2020 5:16 pm

Or you could send me your address.

One question, if you create a new file (a blank) and then make an object, do you
Have the same issue? My question is to try and get at whether you had a problem with this object vs a general setting you have in 3DS.

Rich
ukrichb
General Shed Duties
 
Posts: 13
Joined: Fri Feb 09, 2018 11:43 pm
Has thanked: 0 time
Been thanked: 1 time

Re: reseting the axis problem

Postby ukrichb » Thu Feb 06, 2020 5:21 pm

I have a feeling the answer still is to make changes to the pivot point, even though you tried that. Have you tried doing that?
ukrichb
General Shed Duties
 
Posts: 13
Joined: Fri Feb 09, 2018 11:43 pm
Has thanked: 0 time
Been thanked: 1 time

Re: reseting the axis problem

Postby Class1987 » Fri Feb 07, 2020 11:51 am

I'll send you the file across I'm working on Nottingham station at the moment and the same issue is on that too so I'll send you that plus I'll send you an example file that I've created before and after type of thing.
Cheers, Ian.
Class1987
Full Time Fireman
 
Posts: 67
Joined: Thu Jun 16, 2016 12:40 am
Has thanked: 0 time
Been thanked: 3 times

Re: reseting the axis problem

Postby Class1987 » Fri Feb 07, 2020 11:51 am

I'll send you the file across I'm working on Nottingham station at the moment and the same issue is on that too so I'll send you that plus I'll send you an example file that I've created before and after type of thing.
Cheers, Ian.
Class1987
Full Time Fireman
 
Posts: 67
Joined: Thu Jun 16, 2016 12:40 am
Has thanked: 0 time
Been thanked: 3 times


Return to 3DS Max

Who is online

Users browsing this forum: No registered users and 1 guest

cron