Hi Folks
Introducing The Railway UE
Available now a free playable (no time limit) demo of the signalling module of The Railway simulator.
Bellcodes, Block Instruments and Signals are operable with passing services.
This demo is pre alpha and should not be regarded as a "finished" product. and is supplied as is without support.
For Windows 64bit installation only.
Has been tested on core2 duo , I5 and I7 rigs.
Please check the read me
Merry Christmas all
Paul G (Sly)
Download links
Current Version Rev: 4
30 Dec 2016
http://www.mediafire.com/file/wo3yo97pt ... 9B+Rev4.7z
https://www.dropbox.com/s/u9nr2a3ylcmed ... v4.7z?dl=0
https://1drv.ms/u/s!Alu6DbjKuMtyg05OVzi1zAifAWiE
Improved looking at focus for interactable units
Lever Interlocking Implemented
Basic Error Checking complete
Accelerated timetable with crossing trains
Notes:
Have improved the look at focus when selecting levers etc, also enabled Middle Mouse Button operation of interactables.
Full lever interlock now enabled, Using the signalmans answer to the question which lever do you pull ... Answer the one that will move.
It is possible to pull a wrong lever AIRL,
Once the next block has released your signals Both the home and Starter will move, But if you pull the starter the home cannot be moved... so Home First Then Starter (section signal)
Bellcode error checking implemented,
It is now possible to have trains running in both directions simualtaneously through your block, This in effect doubles the load so would be interested to hear how it performs.
It should run on automatic, although if it has slowed down your computer a lot.......It may well trip up the timing.
If you attempt it on manual, be prepared.. it can get hectic
I have left Rev 2 links at the bottom if the load on Rev4 is too much.
The light engine is the final service in this Timetable
Rev: 2
26 Dec 2016
Fixed couple of bugs clearing TOS
https://www.dropbox.com/s/kh8nut37wy44i ... v2.7z?dl=0
https://1drv.ms/u/s!Alu6DbjKuMtyg0wTuCRFX24r0tIG