Junction signal not pulling off until right before it? (AndiS scripting)

[Auscgu]

Andis,
I made a clone of the route and re signaled it using wrappers and all paths signaled.
Not done all the sidings with wrappers as this can be added.
Also changed the bracket signals to arm priority as you pointed out.
I always use arm priority.

The bracket signal at Wareham to the bay.

Added a shared disc so they can copy the install.

[Auscgu]

Worgret Jct signals where not clearing the distance arm for the main only the branch.
This was a arm priority issues as well.

The Advance Start for Wareham towards Worgret Junction.
The bracket signal is interesting as it a Home signal for the main and a Home/Start for the branch.

The Worgret Junction bracket signal.

[AndiS]

I guess we should focus on Joe's current issues here. That is the up direction a Wareham, mostly. I opened up a few threads for the other things. Unfortunately, it did not let me steal you images by quoting them there.

Andis,
I made a clone of the route and re signaled it using wrappers and all paths signaled.
Not done all the sidings with wrappers as this can be added.
Also changed the bracket signals to arm priority as you pointed out.
I always use arm priority.

$matches[2]

The bracket signal at Wareham to the bay.

When it is working, it would be great for Joe to compare your clone with his version side by side.

[Auscgu]

Andis,
I created the clone as a means of sending the signals to Monty & Joe.
That way I am not making changes in there route and they can see how to signal.
Worgret Jct is working also.

This is the Wareham Dn Main Avd Start Signal set to main.

This is the Wareham Dn Main Avd Start Signal set to branch.

I simply reconfigured the signal bu arm priority and it works.

[Auscgu]

The signal configuration.

Wareham Dn Main Avd Start Signal

Worgret Jct Dn Main Home

Worgret Jct Dn Main Start

[Auscgu]

The end of the Mainline to ensure the signals work.

There is a Home, Start & Distant Signal.

The Branch signals in the Up Direction.
There is a junction distant signal.

Worgret Jct Up Bch Home

Worgret Jct Up Bch Start
To not show the signal to the Dn Main link 2.
I would add a - to make it an inner link only.

[Auscgu]

The Dn Bay Platform has a catch point before the main.

To signal I used a 4 link signal.
Link 1 to Main, Link 2 to catchpoint and is an inner link.
3 & 4 are inner links.
This works and has a path to the catch point but no signal.
You could ignore this catch point as it will never be used.
Not hard to signal as well.

[AndiS]

Synchronously, I created two extra threads and commented there so we get the topics a bit disentangled.