Zusi3 Out Now

For all other chatting you want to do and that does not fit in another forum you can use this one.

Re: Zusi3 Out Now

Postby JasonM » Sat Mar 05, 2016 4:28 pm

Thanks for the info AndiS, I am still struggling with Raildriver but am sure I will get there in the end.
JasonM
Full Time Fireman
 
Posts: 80
Images: 13
Joined: Wed Apr 30, 2014 7:26 pm
Location: UK
Has thanked: 13 times
Been thanked: 13 times

Re: Zusi3 Out Now

Postby AndiS » Sat Mar 05, 2016 8:05 pm

I had a quick look and all the manual says is that Raildriver is automatically recognised and nothing needs to be done. :roll:
On another page, it says that Zusi does not recognise devices plugged in while Zusi is running. But you sure started Zusi again at least once after you plugged in Raildriver.

Do you have multiple devices collected? There is a whole set of pages devoted to this case, but it seems to address those with a complex cab.

Maybe post a question when in the English Zusi forum? Those who own Raildriver will have made their experiences over the past days that may well deviate from what the manual says. :lol: Not that I blame Carsten for that but when I read "you should not need to do anything, something in me frowns every time".

You could dump promising subsubsections into Google translator and when that does not result in something anyone can understand, point me at it.
AndiS
Top Link Driver!
 
Posts: 810
Joined: Wed Apr 09, 2014 5:48 pm
Has thanked: 270 times
Been thanked: 320 times

Re: Zusi3 Out Now

Postby JasonM » Sun Mar 06, 2016 5:49 pm

Thanks again AndiS, I tried to run the manual through Google Translate but it said it was too large which is understandable, I will just copy and paste the pages as and when I want to read them.

Yesterday had a very nice run from Bestwig to Warburg with the 216, lovely scenery and it was a pleasure to arrive right time, though did not score very well as I missed Sifa once and done a few last minute breaking for a few stations to make up a bit of time which caused that nice hot break pad smell for the passengers :lol:

Been trying to drive the 648 DMU but for some reason can't seem to do control it, I must be doing something wrong?
JasonM
Full Time Fireman
 
Posts: 80
Images: 13
Joined: Wed Apr 30, 2014 7:26 pm
Location: UK
Has thanked: 13 times
Been thanked: 13 times

Re: Zusi3 Out Now

Postby AndiS » Sun Mar 06, 2016 7:29 pm

Dumping the whole manual into Google Translate, now that is a suggestion. :lol: If we were not all against big companies that don't pay taxes nowadays, I would even call it inconsiderate. Just imagine all the pages processed that you will never ever read. That said, loading it in Acrobat reader should be reconsidered. And guess what, mine recently crashed when I did some searching or TOC scrolling or so. 745 pages are fully in line with the corporate identity and the product image.
AndiS
Top Link Driver!
 
Posts: 810
Joined: Wed Apr 09, 2014 5:48 pm
Has thanked: 270 times
Been thanked: 320 times

Previous

Return to General Chat

Who is online

Users browsing this forum: No registered users and 2 guests